Name: 1 Gang 0–10V Rotary LED Dimmer
SKU: PS-1G-D10V
Availability: InStock

Adjust your LED lighting with a knurled brass rotary knob and a solid brass wall plate. This 1-gang dimmer connects to the separate low-voltage control input of a compatible 0–10 V or 1–10 V LED driver.

Dimming range: 5–100%, with 0.5–10 V DC control adjustment.
Plate size: 2.83 × 4.72 in.
Finishes: Brass, Retro, Black and White, each with brass screws and a brass knob.
Certification: UL certified.
Connection: brown lead to DIM+ and blue lead to DIM−.
Compatibility: requires a compatible LED driver with a separate low-voltage dimming input.

Control Your Lighting

Turn the rotary knob to adjust the lighting level through your LED driver’s dimming input. The driver determines the lighting system’s output voltage, maximum power and response across the dimming range.

Choose a driver that supports the controller’s voltage range and signal-current requirements. Source/sink compatibility, the number of connected drivers and on/off switching must follow the driver and controller installation instructions. Connect the dimmer only to the designated dimming terminals; never connect it directly to AC mains or an LED power output.

A Coordinated Finish

The solid brass plate and textured knob bring a considered finish to everyday lighting controls. Choose Brass or Retro for warm metal tones, or Black or White to coordinate with the wall. Every available assembly includes brass screws and a brass rotary knob. Select a plate colour to view its matching product photograph.

Specifications

Configuration	1-gang
Product type	Rotary LED driver signal dimmer
Model	DIMMER-10V
Plate dimensions	2.83 × 4.72 in
Mounting hole spacing	3.29 in
Plate material	Solid brass
Certification	UL certified
Control interface	0–10 V / 1–10 V DC analog control for compatible LED drivers
Control voltage range	0.5–10 V DC
Dimming range	5–100%; lighting response depends on the LED driver
Maximum control-signal current	40 mA
Control leads	Brown: DIM+; Blue: DIM−
Lead length	13 in
Controller dimensions	0.9 × 1.3 × 1.3 in, including knob
Operating temperature	5–122 °F
Connection	LED driver dimming input only; no direct AC mains connection
Lighting power	Determined by the connected LED driver

Installation and Compatibility

Have a qualified electrician install the dimmer using the instructions for model DIMMER-10V and your LED driver.

Confirm the driver has a compatible 0–10 V or 1–10 V dimming input. Check source/sink operation, signal-current limits and the permitted number of connected drivers.
Disconnect the lighting supply before installation.
Connect the brown control lead to DIM+ and the blue control lead to DIM−.
Keep the control leads separate from AC mains and the driver’s LED power output.
Follow the driver’s requirements for on/off switching. Dimming range does not specify complete shutoff.
Check wall-box clearance and follow the applicable grounding and conductor-separation requirements.
Restore power and test the lighting controls after installation.